Copper Grounding Bar

GKM Part # GBA

Electrical copper alloy 110 busbar 3/16" thick x 1" wide. Sizes to fit all FR racks. Tapped holes for 10/32 screws conveniently spaced. Shipped separately with mounting hardware or installed in frame.

Frame	GKM Part #
FR	GBA-(80,87,94)

Vertical Cable Distribution Bar

GKM Part # DBA

For fastening of cables inside racks. Sizes to fit all FR racks. Multiple convenience holes for tying cables. Hard aluminum 3/16" thick x 3/4" wide. Shipped separately with mounting hardware or installed in frame.

Frame	GKM Part #
FR	DBA-(80,87,94)

Power Strip

GKM Part # WM

Isolated ground single circuit power strip 12 or 19 outlets on 6" centers. Supplied with entrance fitting. Shipped separately with mounting hardware or installed in frame.

Color: Grey
12 outlet - 12 AMP

Please specify "TF" for top feed and "BF" for bottom feed.

GKM Part #	Length	Outlets	Cord
WM 72/12G	72"	12	*wire lead
WM 72/12GC	72"	12	w/cord
WM 72/12GC + 8TL	72"	12	8' twist lock plug
* All WM 72/12 are shipped with backup bar for GKM Racks

Optional Rack Modification

Rack "Tie Bar" Modification

For additional cable fastening and support inside racks. Tie bars are available for FR and VTF. The 1/8" x 1/2" steel tie bars are shipped installed in rack approximately every 7" on both sides (see illustration).

To order: Add "T" to frame code to indicate tie bar modification as shown below:

FR - FRT
VTF - VTFT

Horizontal Tie Bar

The horizontal tie bar provides additional cable management to rack by increasing wire tying capacity. 19" x 3/16" x 3/4" aluminum bar with mounting holes.

Finish: Caustic etch

GKM Part # HTB19

Horizontal Lacing Bar

1/8" x 1/2" steel with mounting holes. Mounts between front and rear mounting panel angles, set 17-7/16" apart.

Standard Colors: BT - Black Textured, PLW - Pearl White

Rack Divider Channel

RC

Rack divider panels provide space between ganged racks, allowing additional cable management for cable intensive, high density racks. Channels are constructed of bent 1/16" steel and fit between racks. Available in 4" and 6" widths and in 80", 87" and 94" heights. Mounting hardware included.

Standard Colors: BT - Black Textured, PLW - Pearl White